During times when public health directives for disinfecting touch surfaces are in effect - follow the guidelines below for interacting with and disinfecting LETU technology.
- Disinfect each shared technological device after each use. This includes but is not limited to copy machines and fax machines. This is the responsibility of the employee that uses the device.
- Allow disinfectant to dry before using equipment to allow time for disinfecting to occur.
- Wipes vs Sprays: Sprays may damage electronic components and so damp (not wet) wipes should always be used instead of sprays when disinfecting technology.
- Technology-Safe Disinfectants: Where possible, technology should be sanitized with alcohol-based wipes using a minimum of 62% isopropyl alcohol. Avoid using bleach, ammonia or other harsh cleaning solvents on most technology. In a pinch, keyboards and mice may generally be wiped with harsher cleaners if no alcohol-based cleaner is available.
- Keyboards, Mice and Touchpads:
- Technology including keyboardsKeyboards, mice and most button-based touchpads should be disinfected with damp disinfectant wipes provided by LETU. If wipes are not available, a damp wipe may be made from a paper towel and a light application of disinfectant.
- Standard Monitors:
- Do not use any cleaning chemicals (including disinfectant) on standard monitors as they will damage the screen. Alcohol-based cleaners may also damage certain non-glass screens. In general, non-touch screens should not be touched to eliminate the need to disinfect them. Standard screens may be cleaned (though not disinfected) with a lightly damp microfiber cloth. If disinfecting standard monitors is necessary for any reason, contact IT for guidance depending on your monitor brand and model.
- Touchscreens:If you have a touch screen (including touch monitors and smartphone devices), you should treat it , touch monitors, smartphones, tablets, copiers, etc.:
- These devices should be treated as a single-user device and not share it with another usershould not not be shared. A limited number of screens (typically those made with glass) may be able to be disinfected with an alcohol-based wipe only if approved by the screen’s manufacturer.
- Copier touchscreens may be used with one of two approaches:
- The plastic stylus in the copier can be used to control the screen and then sanitized.
- Alternately, the touch screen may be used as normal and then sanitized with an alcohol-based wipe. (As with other touch screens, no harsh cleaners should be used on copier control screens though may be used to clean the plastic stylus).